HP 200 Unified Threat Management (UTM) Appliance Series Schnellstart Anleitung PDF herunterladen (Seite 122)

116

Figure 78 Network diagram

Configuration procedure

# Configure basic ACL 2000, and configure rule 1 to permit packets sourced from Host B, and rule 2 to

permit packets sourced from Host A.

<Firewall> system-view

[Firewall] acl number 2000 match-order config

[Firewall-acl-basic-2000] rule 1 permit source 10.110.100.52 0

[Firewall-acl-basic-2000] rule 2 permit source 10.110.100.46 0

[Firewall-acl-basic-2000] quit

# Reference ACL 2000 on user interfaces VTY 0 through VTY 4 so only Host A and Host B can Telnet to

the firewall.

[Firewall] user-interface vty 0 4

[Firewall-ui-vty0-4] acl 2000 inbound

Configuring source IP-based SNMP login control

Use a basic ACL (2000 to 2999) to control SNMP logins by source IP address. To access the requested

MIB view, an NMS must use a source IP address permitted by the ACL.

To configure source IP-based SNMP login control:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Create a basic ACL and

enter its view, or enter the

view of an existing basic

ACL.

acl [ ipv6 ] number acl-number [ name name ]

[ match-order { config | auto } ]

By default, no basic

ACL exists.

NOTE:

Support for the ipv6

keyword depends on

the device model. For

more information, see

Getting Started

Command Reference

Host B

10.110.100.52

Firewall

IP network

Host A

10.110.100.46

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 149 150

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 200 Unified Threat Management (UTM) Appliance Series Schnellstart Anleitung Seite 122

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP 200 Unified Threat Management (UTM) Appliance Series