HP 200 Unified Threat Management (UTM) Appliance Series Schnellstart Anleitung PDF herunterladen (Seite 121)

115

Ste

Command

Remarks

3. Configure an ACL rule.

rule [ rule-id ] { permit | deny }

rule-string

N/A

4. Exit advanced ACL view.

quit N/A

5. Enter user interface view.

user-interface [ type ] first-number

[ last-number ]

N/A

6. Apply the ACL to the user

interfaces.

acl [ ipv6 ] acl-number { inbound |

outbound }

• inbound: Filters incoming Telnet

packets.

• outbound: Filters outgoing

Telnet packets.

NOTE:

Support for the ipv6 keyword

depends on the device model. For

more information, see

Getting

Started Command Reference

Configuring source MAC-based Telnet login control

Ethernet frame header ACLs apply to Telnet traffic only if the Telnet client and server are located in the

same subnet.

To configure source MAC-based Telnet login control:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Create an Ethernet frame

header ACL and enter its

view.

acl number acl-number [ name name ]

[ match-order { config | auto } ]

By default, no Ethernet

frame header ACL exists.

3. Configure an ACL rule.

rule [ rule-id ] { permit | deny } rule-string

N/A

4. Exit Ethernet frame header

ACL view.

quit N/A

5. Enter user interface view.

user-interface [ type ] first-number

[ last-number ]

N/A

6. Use the ACL to control user

logins by source MAC

address.

acl acl-number inbound

inbound: Filters incoming

packets.

Telnet login control configuration example

Network requirements

Configure the firewall in Figure 78 to permit only incoming Telnet packets sourced from Host A and Host

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 149 150

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 200 Unified Threat Management (UTM) Appliance Series Schnellstart Anleitung Seite 121

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP 200 Unified Threat Management (UTM) Appliance Series