HP SuperStack Firewall Series Bedienungsanleitung PDF herunterladen (Seite 41)

Configuring WAN Settings 41

■

Using a Single Static IP Address — This address must be taken by the

Firewall’s WAN port to allow devices connected to the LAN port to

communicate with devices connected to the WAN port. Network

Address Translation (NAT) will be enabled.

■

Using Multiple Static IP Addresses — One address will be taken by

Firewall’s WAN port. NAT can be disabled sharing the addresses

between the DMZ port and the LAN port or enabled leaving all the

public addresses for the DMZ port. This option will be offered later in

the Installation Wizard.

■

UsinganIPAddressprovidedbyaPPPoEServer— OneIPaddressis

provided by the PPPoE server. This is taken by the WAN port. Network

Address Translation (NAT) will be enabled.

■

Using a Static IP address provided by a DHCP Server — One IP address

is provided by the DHCP server. This is taken by the WAN port.

Network Address Translation (NAT) will be enabled.

The settings for each of these options are detailed in the following

sections.

Using a Single Static

IP Address

Select the Assigned you a single static IP address option and click the Next

button. The Getting to the Internet screen will be displayed as shown in

Figure 12 below.

Figure 12

Configuring the Firewall

DUA1611-0AAA02.book Page 41 Thursday, August 2, 2001 4:01 PM

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 213 214

Keine Kommentare

HP SuperStack Firewall Series Bedienungsanleitung Seite 41