HP S10 Bedienungsanleitung PDF herunterladen (Seite 102)

100 Operating Requirements

Operating Requirements

Software and Operating System Requirements

The hub does not require drivers or specific versions of operating systems. However,

systems and FC-AL devices that can connect to the hub do have driver and operating

system requirements. Contact an HP sales representative for information on hardware and

software requirements for the FC-AL devices you plan to connect to the hub.

Physical and Cabling Requirements

Note For short-wave ports, SC Connectors must be AMP multimode #504657-1 or

equivalent to meet FCC Part 15 standards. For long-wave ports, SC Connectors

must be AMP single-mode #504655-1 or equivalent to meet FCC Part 15

standards. Cable Plant Specifications on page101 lists more requirements.

Model S10 Short-Wave Hub

The short-wave hub supports 10 non-OFC, short-wave FC-AL connections. In arbitrated

loop topology, data rates and wavelength between ports must be the same. The short-wave

hub supports only gigabit short-wave to gigabit short-wave connections using fiber cables.

For the short-wave hub, Hewlett-Packard recommends 50-micron multimode fiber cable

for new installations but also supports 62.5-micron multimode fiber cable with SC-style

connectors in existing installations. Installations can mix 50-micron and 62.5-micron

cables.

Model L10 Long-Wave Hub

The long-wave hub supports short-wave gigabit to short-wave gigabit connections from

ports 1 through 9 using fiber cables. The long-wave hub also supports a long-wave hub to

long-wave hub connection from the long-wave port.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 133 134

Keine Kommentare

HP S10 Bedienungsanleitung Seite 102