HP 220mx Betriebsanweisung PDF herunterladen (Seite 61)

100

101

SCSI-2 Drive Command Set

Write (Group 0) Command (0AH)

Chapter 22-24

Transfer Length The Transfer Length field specifies the number of

contiguous logical blocks of data to be written. A

Transfer Length of 0 specifies that 256 logical blocks are

to be written.

PBA A Physical Block Address bit of 1 indicates that physical

block addressing is used.

A PBA bit of 0 indicates that logical block addressing is

used.

ErsCntl If the Erase Control bit is set to 0, an erase is

automatically performed before writing the data.

An Erase Control bit of 1 suppresses the erase

operation.

NOTE When this command is used with 512 byte/sector 4X/ 8X/14X media, 1024

byte/sector 8X/14X media, or 2048 14X media, it is not possible to address

all logical blocks on the disk because those media types contain >2

logical blocks.

NOTE For write-once optical disks, blank checking is performed before writing

data. If a written block is detected during blank checking, the drive will

return a CHECK CONDITION status. The sense key/additional sense

code will be set to BLANK CHECK/Overwrite Attempted.

NOTE When this command is used with 14X 512 OR 1024 byte/sector media,

setting the ErsCntl bit or the PBA bit will cause the drive to return a

CHECK CONDITION status. The sense key/additional sense code will be

set to ILLEGAL REQUEST/INVALID FIELD in CDB.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 377 378

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 220mx Betriebsanweisung Seite 61

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Interne Festplatten HP 220mx