HP 220mx Betriebsanweisung PDF herunterladen (Seite 302)

Autochanger Error Codes

Additional Sense Data Format for Error Recovery

Appendix B B-15

Autochanger Error Codes

Move Error

Code The movement that was being performed when the

error occurred. The values of the Move Error Codes are

in Table B-9 on page B-29.

Hardware Error

Code Determined by fault isolation, this error code indicates

the cause of the failure. The values of the Hardware

Error Codes are in Table B-8 on page B-22.

First FRU The most likely Field Replacable Unit to be the cause of

the failure. (See Table A-2 on page A-4)

Second FRU The second most likely Field Replacable Unit to be the

cause of the failure. (See Table A-2 on page A-4.)

Third FRU The third most likely Field Replacable Unit to be the

cause of the failure. (See Table A-2 on page A-4.)

NOTE The FRU numbers returned are indicators for the most likely cause of an

error, but may not be the actual cause of a problem. Simply changing the

FRU listed may or may not fix the associated problem.

47-49 Reserved (0)

50-54 Micro-Move ID History (Table C-2 on page C-17)

55 Failed Micro-Move ID (Table C-2 on page C-17)

56 Micro-Move Error Code (Table B-11 on page B-36)

57-60 Vertical Motor Commanded Position

61-64 Vertical Motor Actual Position

65-68 Horizontal Motor Commanded Position

69-72 Horizontal Motor Actual Position

73-77 Reserved (0)

Table B-6 Request Sense - Additional Sense Data

(For models 40fx, 80ex, 125ex and 220mx ONLY)

Byte 7 6 5 4 3 2 1 0

1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 377 378

Keine Kommentare

HP 220mx Betriebsanweisung Seite 302