Hp TC4100 Bedienungsanleitung PDF herunterladen (Seite 73)

Chapter 4 Error Messages

0100 Keyboard error during

POST

A key on the keyboard has been pressed during POST of the HP

Server.

To correct this:

1. Ensure nothing is placed on the keyboard and no key is acciden-

tally pressed down.

2. Reboot the server.

3. If the error persists, your keyboard may need to be replaced. Con-

tact your service representative.

0101 Keyboard error The keyboard has reported an error during its self-test.

To correct this:

1. Restart your HP Server.

2. If the error persists, your keyboard may need to be replaced. Con-

tact your service representative.

0102 Keyboard controller

error

POST has detected a general failure in the integrated keyboard

controller.

To verify this error:

1. Restart your HP Server.

2. If the error persists, your keyboard may need to be replaced. Con-

tact your service representative.

0103 Keyboard is not

connected

POST has detected the keyboard is not connected.

To correct this:

1. Verify the keyboard connector is firmly connected.

2. Reboot the server.

3. If the problem persists, your keyboard cable may be damaged or

your keyboard may need to be replaced. Contact your service rep-

resentative.

0105 Mouse boot error The system board has detected a mouse error during POST.

To correct this:

1. Clean the mouse and its moving ball as described in the User's

Guide.

2. If the problem persists, your mouse may need to be replaced. Con-

tact your service representative.

0106 Mouse is not

responding

The system board has detected the mouse is not responding.

To correct this:

1. If the mouse has just been removed, press Esc to automatically

validate the change.

2. Otherwise, verify the mouse connector is firmly connected.

3. If the problem persists, your mouse may need to be replaced. Con-

tact your service representative.

0108 Mouse and Keyboard

connections reversed

POST has detected the mouse and keyboard connections are reversed.

To correct this:

1. Turn the server off.

2. Swap the mouse and keyboard connections.

3. Turn on the server power and reboot the server.

Table 4-1. POST Error Codes

Code Description Problem/Solution

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 129 130

Kommentare zu diesen Handbüchern

Keine Kommentare

Hp TC4100 Bedienungsanleitung Seite 73

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computers Hp TC4100