Hp TC4100 Bedienungsanleitung PDF herunterladen (Seite 126)

124

Chapter 9 Specifications

Environment

The specifications listed below can vary if you install a mass storage device in your HP Server tc4100 that has

more stringent environmental limits. Ensure that the operating environment is suitable for all mass storage

devices in use.

Power Specification

Input Power Requirements

Table 9-6 displays the HP Server tc4100 input power requirements.

Table 9-5. Environmental Requirements

BTU 1845 BTU/hr maximum

Temperature Operating 5° C to 35°C

(41°F to 95° F)

Non-operating –40° C to +65° C

(–40° F to +149° F)

Humidity Operating 20% to 80% relative humidity

(non-condensing)

Non-operating 5% to 95% relative humidity

(non-condensing)

Altitude Operating -30 to 3,045 m (10,000 ft)

Non-operating -30 to 12,180 m (40,000 ft)

Acoustic Emissions Sound Level: (LpA) < 43 dB(A) bystander position

Table 9-6. Input Power Requirements

Input Voltage and Frequency 100-240 ±10%; 50/60 Hz

Maximum Inrush Current 8 AMPs peak (for 1 power supply) 120 VAC or

16 AMPs peak (for 2 power supplies)

16 AMPs peak (for 1 power supply) 240 VAC or

32 AMPs peak (for 2 power supplies)

Delayed Action Circuit Breaker

Recommended

North America: a 20 A minimum delayed action

circuit recommended for each 16 A power

distribution unit (PDU) that is connected to an HP

Server tc4100.

Europe (single server in a rack): a 16 A minimum

circuit with one IEC-MCB C-type breaker for

each 16 Amp PDU.

Europe (single server in a rack): a 16 A minimum

circuit with one IEC-MCB D-type breaker for

each 16 Amp PDU.

NOTE Some local codes allow 16-amp service for a 16-amp device. Consult a qualified

electrician or local regulatory authority before beginning electrical site preparation.

1 2 ... 121 122 123 124 125 126 127 128 129 130

Keine Kommentare

Hp TC4100 Bedienungsanleitung Seite 126