Hp Integrity rx7620 Server Bedienungsanleitung

Service Processor (GSP or MP) User GuideHP Part Number: A5201-90017-ed2Published: October 2009Edition: 2nd Edition

10

1 Overview of the Service ProcessorThis chapter provides an introduction to the service processor on HP cell-based servers.Introduction to Service Pro

Command menu, enter MA or enter ^b (Control-b) to returnto the service processor Main menu.See “MP Commands” (page 27) for details.Service processor c

Chassis Logs and Event Logs On both HP 9000 systems and HP Integrity systems, youcan view real-time (live) system events and can view priorevents that

Cannot execute commands that could potentially affectmultiple nPartitions or affect the service processorconfiguration.Each user account can either pe

2 Using the Service ProcessorAccessing and Using the Service ProcessorThis section describes how to login to the service processor (MP or GSP) for an

Example 2-1 Overview of a Service Processor Login SessionThe following output shows a sample login session for a server with the service processorhost

3. Use the service processor menus and commands as needed and log out when done.To log out, select the Exit Connection menu item from the Main menu (e

Figure 2-1 Overview of Service Processor (MP or GSP) MenusNavigating through Service Processor MenusFigure 2-2 (page 20) shows the commands and option

Enter Q (or lower-case q) as a response to any menu prompt to exit the prompt and returnto the previous sub-menu.You can do this throughout the servic

© Copyright 2004-2009Legal NoticesThe information contained herein is subject to change without notice. The only warranties for HP products and servic

Figure 2-2 Navigating through Service Processor (MP or GSP) MenusnPartition Console FeaturesThe service processor Console menu provides access to all

Each nPartition console can display a variety of information about the nPartition, including:• Partition startup, shutdown, and reset output.• The sys

On HP Superdome servers, the customer LAN port is labeled “Customer LAN”. On HPrp8400 servers, it is “GSP LAN”. On HP rp7405/rp7410 servers, it is the

Table 2-2 Default Configuration for Service Processor Private LAN (HP Superdome Servers Only)(continued)255.255.255.0Private LAN Subnet Mask192.168.2.

To access the console log for an nPartition, enter CL from the service processor Main menu andselect which nPartition console log you want to view. To

(C)lear All Chassis Logs (Q)uitGSP:VW> L Entering Live Log display A)lert filter C)ell filter P)artition filter

26

A MP CommandsCommand Reference: Service Processor (MP or GSP) CommandsTable A-1 lists the commands available from the service processor command menu (

Table A-1 Service Processor (MP or GSP) Command Reference (continued)DescriptionCommandSystem and Access Configuration Commands — Service Processor (M

B Extensible Firmware Interface (EFI)EFI System Boot EnvironmentOn HP Integrity servers the system boot environment is provided by the Extensible Firm

Table of ContentsAbout This Document...7Intended

Figure B-1 Accessing the EFI Environment for an nPartitionCommand Reference: EFI Shell CommandsTable B-1 lists the commands supported by the EFI Shell

Table B-1 EFI Shell Command ReferenceDescriptionCommandBoot Commands — EFI Shell Commands related to nPartition bootingSet/view autoboot timeout varia

Table B-1 EFI Shell Command Reference (continued)DescriptionCommandDisconnect driver(s) from device(s)disconnectDisplay list of driversdriversInvoke t

Table B-1 EFI Shell Command Reference (continued)DescriptionCommandView/clear partition or cell PDTpdtShell Navigation and Other Commands — EFI Shell

34

C Boot Console Handler (BCH)Boot Console Handler (BCH) System Boot EnvironmentEach nPartition in a server complex has its own Boot Console Handler (BC

Figure C-1 Accessing the BCH Interface for an nPartitionCommand Reference: BCH Menu CommandsTable C-1 lists the commands available from the Boot Conso

Table C-1 Boot Console Handler (BCH) Command ReferenceDescriptionCommandGeneral Commands — Boot Console Handler (BCH) These BCH commands are available

Table C-1 Boot Console Handler (BCH) Command Reference (continued)DescriptionCommandDisplay or set the nPartition name.PD [name]Set nPartition restart

List of Figures2-1 Overview of Service Processor (MP or GSP) Menus...182-2 Navigatin

List of Tables1 Publishing History Details...

List of Examples2-1 Overview of a Service Processor Login Session...166 List

About This DocumentThis book describes procedures, concepts, and principles for using the management processor(GSP or MP) on HP servers that support n

Typographic ConventionsThis document uses the following conventions.WARNING! A warning lists requirements that you must meet to avoid personal injury.

Related DocumentsYou can find other information on HP server hardware management, Microsoft® Windows®,and diagnostic support tools in the following pu