HP Pro 3380 Spezifikationen PDF herunterladen (Seite 137)

6. Carefully lift the processor from the socket (3).

CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and

handling them could cause irreparable damage. Once pins are damaged it may be necessary to

replace the system board.

The heat sink must be installed within 24 hours of installing the processor to prevent damage to

the processor’s solder connections.

Figure 8-35 Removing the processor

To install a new processor:

1. Place the processor in its socket and close the retainer. Make sure the slot in the processor fits

into the post on the socket.

2. Secure the locking lever. If reusing the existing heat sink, go to step 3. If using a new heat sink,

go to step 6.

3. If reusing the existing fan sink, clean the bottom of the fan sink with the alcohol pad provided in

the spares kit.

CAUTION: Before reinstalling the fan sink you must clean the top of the processor and the

bottom of the fan sink with an alcohol pad supplied in the spares kit. After the alcohol has

evaporated, apply thermal grease to the top of the processor from the syringe supplied in the

spares kit.

4. Apply the thermal grease provided in the spares kit to the top of the processor and install the fan

sink atop the processor.

5. Go to step 7.

Processor 127

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 217 218

Keine Kommentare

HP Pro 3380 Spezifikationen Seite 137