HP Pro 3380 Spezifikationen PDF herunterladen (Seite 97)

Description Spare part number

AMD Sempron processor:

X2 190, 2.5 GHz, 1-MB L2 cache 666889-001

1. Prepare the computer for disassembly (Preparation for Disassembly on page 42).

2. Remove the access panel (

Access Panel on page 43).

3. Lay the computer on its side with the rear facing toward you.

4. Remove the fan sink

Fan Sink Assembly on page 85).

5. If you are removing an Intel processor, rotate the locking lever to its full open position (1), raise

and rotate the microprocessor retainer to its full open position (2), and then carefully lift the

processor from the socket (3).

CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and

handling them could cause irreparable damage. Once pins are damaged it may be necessary to

replace the system board.

CAUTION: The heat sink must be installed within 24 hours of installing the processor to

prevent damage to the processor’s solder connections.

Figure 7-46 Removing an Intel processor

To install a new processor:

1. Place the processor in its socket.

2. If installing an Intel processor, close the retainer.

3. Secure the locking lever.

If reusing the existing heat sink, go to step 4.

If using a new heat sink, go to step 7.

Processor 87

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 217 218

Keine Kommentare

HP Pro 3380 Spezifikationen Seite 97