HP Pro 3380 Spezifikationen PDF herunterladen (Seite 134)

Fan Sink

Description Spare part number

Fan sink 667727-001

The fan sink is secured atop the processor with four captive Torx screws. A fan cable connects to the

system board.

1. Prepare the computer for disassembly (

Preparation for Disassembly on page 94).

2. Remove the access panel (

Access Panel on page 95).

3. Rotate the drive cage to its upright position.

4. Loosen the four captive screws that secure the fan sink to the system board tray.

CAUTION: Fan sink retaining screws should be removed in diagonally opposite pairs (as in an

X) to even the downward forces on the processor. This is especially important as the pins on the

socket are very fragile and any damage to them may require replacing the system board.

Figure 8-33 Loosening the fan sink screws

124 Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 217 218

Keine Kommentare

HP Pro 3380 Spezifikationen Seite 134