Front USB Assembly
Description Spare part number
Front I/O and USB assembly 668570-001
The front USB assembly is secured to the front of the chassis with one screw. Push the assembly into
the chassis to remove it.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 94).
2. Remove the access panel (
Access Panel on page 95).
3. Remove the front bezel (
Front Bezel on page 97).
4. Disconnect the two cables from the system board as follows:
●
Yellow connector labeled F_AUDIO
●
White connector labeled F_USB2
5. Remove the cables from the clip on the base pan of the computer.
Figure 8-26 Removing the cables from the clip
118 Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis
Kommentare zu diesen Handbüchern