Hp NetStorage 6000 Bedienungsanleitung PDF herunterladen (Seite 31)

Configuring Your System and Network

Alert Settings

3-8

SNMP/Network Management Settings

If you are using a Simple Network Management Protocol (SNMP) tool,

you can define the names of the servers to receive notification in case of a

failure.

To define the servers to receive notification:

1 Using the NetStorage web interface, click the Configuration tab, then

select Alert Settings > SNMP/Network Management.

By default, the Community String field is set to public and the Trap

Destination fields are blank.

2 In the Trap Destination fields, enter the IP addresses or names of the

servers you want the system to notify (up to five).

3 Enter a value in the Volume Capacity Threshold field to receive a

warning message if your volume gets to a certain capacity. By default,

the field is set to 95 percent

4 Click either:

• Send SNMP Test Trap to send a cold boot test trap to the destination

addresses and save your changes.

• Apply to only save your settings.

Note The information on this screen is optional. Blank fields do not affect the

functionality of the device.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 191 192

Keine Kommentare

Hp NetStorage 6000 Bedienungsanleitung Seite 31