HP P6350 Bedienungsanleitung PDF herunterladen (Seite 241)

Displays SCSI initiator information: iSCSI or FC. See

the “show initiators command” (page 244)

initiators [fc or iscsi]

Displays initiators and the LUNs to which they are

mapped. See the “show initiators LUN mask

command” (page 246)

initiators_lunmask

Displays iSCSI port information and configuration. See

the “show iSCSI command” (page 247)

iscsi [port_num]

Displays the module’s iSCSI name server (iSNS)

configuration. “show iSNS command” (page 249)

isns [port_num]

Displays the module’s logging information. See the

“show logs command” (page 249)

logs

Displays complete LUN information for a specified

target and LUN. See the “show LUNinfo

command” (page 250)

luninfo

Displays LUN information and their targets. See the

“show LUNs command” (page 251)

luns

Sets system parameters such as symbolic name and log

level. See the “show system command” (page 261)

system

Displays LUN mappings. See the “show lunmask

command” (page 252)

lunmask

Displays memory usage. See the “show memory

command” (page 252)

memory

Displays the module’s management port (10/100)

configuration. See the “show mgmt

command” (page 253)

mgmt

Displays the module’s network time protocol (NTP)

configuration. See the “show NTP command” (page 253)

ntp

Displays module's performance. See the “show perf

command” (page 254)

perf [ byte | init_rbyte |

init_wbyte | tgt_rbyte | tgt_wbyte

]

Displays targets presented by the module: FC, iSCSI,

or both. See the “show presented targets

command” (page 255)

presented_targets [fc or iscsi]

Displays module properties. See the “show properties

command” (page 258)

properties

Displays the module’s simple network management

protocol (SNMP) properties and trap configurations.

See the “show SNMP command” (page 259)

snmp

Displays the module statistics, both FC and iSCSI. See

the “show stats command” (page 259)

stats

Displays module product information including serial

number, software version, hardware version,

system

configuration, and temperature. See the “show system

command” (page 261)

Displays targets discovered by the module: FC, iSCSI,

or both. See the “show targets command” (page 262)

targets [fc or iscsi]

Displays virtual port groups. See the “show VPGroups

command” (page 262)

vpgroups [vpgroup index]

Commands 241

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 315 316

Kommentare zu diesen Handbüchern

Keine Kommentare

HP P6350 Bedienungsanleitung Seite 241

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP P6350