HP A5799A Bedienungsanleitung PDF herunterladen (Seite 47)

server. This number is sent by the

PHONHOME Action Routine.

Host Password for login

routine

Enter the password for the host system for

automatic login. The password may have a

maximum of 16 alphanumeric characters.

Number of Expansion Ports

Reassigned to Modems

The terminal server has been configured to

use all expansion ports as host console

ports.

Upgrading the Software

Your Hewlett-Packard service representative notifies you when an

internal software upgrade is necessary. Installation instructions are

dependent on the type of upgrade required.

Specify Network Parameters

Communication with the terminal server occurs across a TCP/IP

network through either an Ethernet connection or a PPP link.

An Ethernet connection physically connects the terminal server to the

network. PPP (point-to-point protocol) allows a network connection to a

remote device via a modem connection. After a PPP link has been

established you can perform network functions, such as Telnet or FTP,

to the terminal server or to specific serial devices on the network. To

establish a PPP link or to initiate a Telnet session, you must have the

appropriate commercial software package installed and setup on the

remote PC. Connection to the network provides for the following

services:

•

Ping

•

Telnet communication

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 165 166

Keine Kommentare

HP A5799A Bedienungsanleitung Seite 47