
Chapter 5
System Installation
Turning On Housekeeping Power and Logging in to the MP
68
• after 30 seconds has elapsed. Note the flashing amber BPS LED for each BPS becomes a flashing
green LED
Figure 5-5 BPS LED Location
3. Login to the MP:
a. Enter Admin at the login prompt. (This term is case sensitive.)
It takes a few moments for the MP prompt to appear. If it does not, make sure the laptop serial device
settings are correct: 8 bits, no parity, 9600 baud, and None for both Receive and Transmit. Then, try
again.
b. Enter Admin at the password prompt. (This term is case sensitive.)
Kommentare zu diesen Handbüchern