HP ProLiant Generation ML310 Spezifikationen Seite 1

HP ProLiant ML310 Generation 5 Server Maintenance and Service Guide Part Number 450223-004 August 2008 (Fourth Edition)

Customer self repair 10 periode, gewoonlijk vijf (5) werkdagen, retourneren aan HP. Het defecte onderdeel moet met de bijbehorende documentatie word

Customer self repair 11 Serviço de garantia apenas para peças A garantia limitada da HP pode incluir um serviço de garantia apenas para peças. Segun

Customer self repair 12

Customer self repair 13

Customer self repair 14

Customer self repair 15

Illustrated parts catalog 16 Illustrated parts catalog Mechanical components Item Description Spare part number Customer self repair (on pa

Illustrated parts catalog 17 3No—Some HP parts are not designed for customer self repair. In order to satisfy the customer warranty, HP requires tha

Illustrated parts catalog 18 2Optional: Opcional—Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o reparo fe

Illustrated parts catalog 19 System components Item Description Spare part number Customer self repair (on page 5) System components 5 F

© Copyright 2007, 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warra

Illustrated parts catalog 20 Item Description Spare part number Customer self repair (on page 5) h) 2.40-GHz Intel® Xeon® 3220, quad-core, 8-MB

Illustrated parts catalog 21 Item Description Spare part number Customer self repair (on page 5) 12 DV D-ROM drive 447464-001 Mandatory1 Power

Illustrated parts catalog 22 3No: Non—Certaines pièces HP ne sont pas conçues pour permettre au client d'effectuer lui-même la réparation. Pour

Illustrated parts catalog 23

Removal and replacement procedures 24 Removal and replacement procedures Required tools You need the following items for some procedures: • T-10/T-

Removal and replacement procedures 25 WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system c

Removal and replacement procedures 26 WARNING: This server is very heavy. To reduce the risk of personal injury or damage to the equipment: • Obs

Removal and replacement procedures 27 Unlock the bezel Unlock and remove the bezel before accessing the hard drive cage and media bays. Unlock the b

Removal and replacement procedures 28 3. Remove the bezel. To replace the component, reverse the removal procedure. Access panel WARNING: To

Removal and replacement procedures 29 3. Remove a bezel blank. To replace the component, reverse the removal procedure. Media bay blank To remove

Contents 3 Contents Customer self repair ...

Removal and replacement procedures 30 Hard drive blank Remove the component as indicated. To replace the component, slide the component into the ba

Removal and replacement procedures 31 3. Remove the hard drive. To replace the component: 1. Slide the drive into the cage until it clicks, locki

Removal and replacement procedures 32 6. Remove the power button/LED cable. To replace the component, reverse the removal procedure. Temperature

Removal and replacement procedures 33 Front USB connectors To remove the component: 1. Power down the server (on page 26). 2. Remove the bezel (&q

Removal and replacement procedures 34 Diskette drive CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless a

Removal and replacement procedures 35 5. Remove the SATA optical drive. To replace the component, reverse the removal procedure. Full-height tape

Removal and replacement procedures 36 5. Remove the full-height tape drive. To replace the component, reverse the removal procedure. USB tape dri

Removal and replacement procedures 37 5. Remove the USB tape drive. To replace the component, reverse the removal procedure. Hard drive cage and

Removal and replacement procedures 38 To replace the component, reverse the removal procedure. Rear fan and fan holder To remove the component: 1.

Removal and replacement procedures 39 System air baffle and PCI card guide To remove the component: WARNING: To reduce the risk of personal inju

Contents 4 Cabling ...

Removal and replacement procedures 40 6. Remove the PCI fan. To replace the component, reverse the removal procedure. Non-redundant power supply

Removal and replacement procedures 41 Hot-plug power supply CAUTION: Leave all failed power supplies installed until ready to replace with a wor

Removal and replacement procedures 42 6. Remove the redundant power supply backplane assembly. To replace the component, reverse the removal proce

Removal and replacement procedures 43 You can expand server memory by installing PC2-6400 DDR2 SDRAM DIMMs. The system supports up to four DIMMs for

Removal and replacement procedures 44 To replace the heatsink: 1. Use the alcohol swab to remove all the existing thermal grease from the proces

Removal and replacement procedures 45 3. Align and install the heatsink with the arrow on the heatsink label pointing to the front of the server.

Removal and replacement procedures 46 5. Open the processor retaining latch and the processor socket retaining bracket. 6. Using your fingers, re

Removal and replacement procedures 47 1. If the processor has separated from the installation tool, carefully re-insert the processor in the tool.

Removal and replacement procedures 48 3. Press down firmly until the processor installation tool clicks and separates from the processor, and then

Removal and replacement procedures 49 6. Apply all the grease to the top of the processor in one of the following patterns to ensure even distribut

Customer self repair 5 Customer self repair HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow fo

Removal and replacement procedures 50 Expansion boards To remove the component: 1. Power down the server (on page 26). 2. Unlock the bezel (on pag

Removal and replacement procedures 51 6. Remove the PCI-X extender board. To replace the component, reverse the removal procedure. Battery If the

Removal and replacement procedures 52 4. Remove the battery. To replace the component, reverse the removal procedure. IMPORTANT: After replaci

Removal and replacement procedures 53 10. Open the processor retaining latch and the processor socket retaining bracket. CAUTION: To avoid

Removal and replacement procedures 54 11. Using your fingers, remove the processor from the failed system board. CAUTION: To avoid damage to t

Removal and replacement procedures 55 a. Open the processor retaining latch and the processor socket retaining bracket. b. Remove the processor s

Removal and replacement procedures 56 5. Close the processor retaining latch and the processor socket retaining bracket. 6. Clean the old ther

Removal and replacement procedures 57 7. Apply all the grease to the top of the processor in one of the following patterns to ensure even distribut

Removal and replacement procedures 58 10. Install all components removed from the failed system board. 11. Install the access panel. 12. Lock the

Cabling 59 Cabling Server cabling Item Description 1 SATA hard drive cable (hard drive) 2 Front USB cable 3 SATA optical drive cable 4 Front

Customer self repair 6 • Obligatoire - Pièces pour lesquelles la réparation par le client est obligatoire. Si vous demandez à HP de remplacer ces p

Cabling 60 SATA hard drive cabling Item Description 1 Power cable 2 SATA cable SAS hard drive cabling Item Description 1 Power cable 2 SAS

Diagnostic tools 61 Diagnostic tools Troubleshooting resources The HP ProLiant Servers Troubleshooting Guide provides procedures for resolving commo

Diagnostic tools 62 Survey functionality is installed with every SmartStart-assisted HP Insight Diagnostics installation, or it can be installed thr

Component identification 63 Component identification Front panel components Item Description 1 DVD-ROM drive 2 Media bays (bezel blanks) 3 USB

Component identification 64 Front panel LEDs and buttons Item Description Status 1 DVD-ROM drive ejector button — 2 DVD-ROM drive activity L

Component identification 65 SAS and SATA device numbers Hot-plug SATA or SAS hard drive LEDs Item LED description Status 1 Fault/UID status

Component identification 66 The online/activity status LED will not illuminate if using SATA drives connected to the embedded storage device. In thi

Component identification 67 Rear panel LEDs • Redundant hot-plug power supply model Item LED Status 1 NIC/iLO 2 link On = Link Off = No lin

Component identification 68 Item LED Status 1 NIC/iLO 2 link On = Link Off = No link 2 NIC/iLO 2 activity Flashing = Activity Off = No activ

Component identification 69 Item Description 17 System maintenance switch 18 PCI fan connector 19 System battery 20 SATA connector 4 (hard drive)

Customer self repair 7 NOTA: alcuni componenti HP non sono progettati per la riparazione da parte del cliente. Per rispettare la garanzia, HP richi

Component identification 70 Position Default Function S7 Off Reserved S8 Off Reserved When the system maintenance switch position 6 is set to th

Component identification 71 System board LEDs Item LED description Status 1 Processor failure Amber = A multibit error has occurred. Off = No

Component identification 72 System LEDs and internal health LED combinations When the internal health LED on the front panel illuminates either ambe

Component identification 73 PCI-X extender board components Item Description 1 PCI-X expansion slot 1 2 System board connector Fan location

Specifications 74 Specifications Environmental specifications Specification Value Temperature range* Operating 10 °C to 35°C (50°F to 95°F) Shi

Specifications 75 Specification Value Maximum peak power 410 W (non-redundant non-hot-plug) 430 W (redundant hot-plug) * 100 to 127 VAC is required

Acronyms and abbreviations 76 Acronyms and abbreviations CMOS complementary metal-oxide semiconductor CSR Customer Self Repair DDR2 double data ra

Acronyms and abbreviations 77 SAS serial attached SCSI SATA serial ATA SCSI small computer system interface UID unit identification UPS uninterr

Index 78 A access panel 16, 28 additional information 61 air baffle 39 B battery 51, 70 bezel 16, 27 bezel blank 28 bezel key 19 bezel

Index 79 I iLO (Integrated Lights-Out) 69 IML (Integrated Management Log) 62 Insight Diagnostics 61 Integrated Management Log (IML) 62 intern

Customer self repair 8 anrufen und sich von einem Mitarbeiter per Telefon helfen lassen. Den Materialien, die mit einem CSR-Ersatzteil geliefert wer

Index 80 SATA optical drive 34 serial connector 66, 68 serial number 52 server feet 16, 58 server specifications 74 server, front panel LED

Customer self repair 9 Centro de asistencia técnica de HP y recibirá ayuda telefónica por parte de un técnico. Con el envío de materiales para la su