HP ProLiant BL460c Betriebsanweisung

HP ProLiant BL460c Gen9 Server Blade User Guide Abstract This document is for the person who installs, administers, and troubleshoots servers and st

Component identification 10 Position Default Function S3 Off Reserved S4 Off Reserved S5 Off Off = Power-on password is enabled. On = Power-on

Component identification 11 SUV cable connectors CAUTION: Before disconnecting the SUV cable from the connector, always squeeze the release butt

Operations 12 Operations Power up the server blade The Onboard Administrator initiates an automatic power-up sequence when the server blade is insta

Operations 13 o poweroff server [bay number] force This form of the command forces the server blade to enter standby mode without properly exiting a

Operations 14 Remove the access panel To remove the component: 1. Power down the server blade (on page 12). 2. Remove the server blade (on page 13

Operations 15 o DIMM baffle (right side) o DIMM baffle (left side) Remove the storage controller 1. Power down the server blade (on page 12). 2

Operations 16 3. Place the server blade on a flat, level work surface. 4. Remove the access panel (on page 14). 5. Prepare the storage controller

Operations 17 6. Remove the internal USB drive, if installed. To locate the internal USB connector, see "System board components (on page 9).&q

Operations 18 5. Remove the mezzanine assembly. Remove the FlexibleLOM 1. Power down the server blade (on page 12). 2. Remove the server blade (

Operations 19 2. Remove the server blade (on page 13). 3. Place the server blade on a flat, level work surface. 4. Remove the access panel (on pa

© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties

Setup 20 Setup Overview Installation of a server blade requires the following steps: 1. Install and configure an HP BladeSystem c-Class enclosure.

Setup 21 Installing interconnect modules For specific steps to install interconnect modules, see the documentation that ships with the interconnect

Setup 22 • HP BladeSystem c3000 Enclosure and Tower Enclosure Server blade signal Interconnect bay number Interconnect bay label Notes Flexi

Setup 23 Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-Thru modules and switch modules. For more infor

Setup 24 2. Remove the enclosure connector cover. 3. Install the server blade. Completing the configuration To complete the server blade and HP

Hardware options installation 25 Hardware options installation Introduction If more than one option is being installed, read the installation instru

Hardware options installation 26 2. Prepare the drive. 3. Install the drive. 4. Determine the status of the drive from the drive LED definitions

Hardware options installation 27 6. Prepare the storage controller for installation. 7. Align the storage controller with the alignment pins and l

Hardware options installation 28 4. Remove the access panel (on page 14). 5. Disconnect the direct connect SATA cable, if installed ("Install

Hardware options installation 29 11. Press down on the cable connector to fully seat the HP Smart Storage Battery cable connector to the system boar

Contents 3 Contents Component identification ...

Hardware options installation 30 5. Remove the mezzanine assembly. 6. Align the mezzanine card with the guide pins on the mezzanine assembly.

Hardware options installation 31 7. Install the mezzanine card in the mezzanine assembly, and then tighten the mezzanine card screws to secure the c

Hardware options installation 32 The memory subsystem in this server blade can support LRDIMMs and RDIMMs: • RDIMMs offer address parity protection

Hardware options installation 33 Channel Slot Slot number 4 D H 6 5 For the location of the slot numbers, see "DIMM slot locations (on page

Hardware options installation 34 Item Description Definition 32 GB 2 Rank 1R = Single-rank 2R = Dual-rank 4R = Quad-rank 3 Data width x4 = 4-bit

Hardware options installation 35 Advanced ECC protects the server blade against some multi-bit memory errors. Advanced ECC can correct both single-b

Hardware options installation 36 Online spare population guidelines For Online Spare memory mode configurations, observe the following guidelines: •

Hardware options installation 37 10. Install the DIMM. 11. Route and connect the direct connect SATA cable, if installed ("Installing the dir

Hardware options installation 38 To install a processor: 1. Update the system ROM. Locate and download the latest ROM version from the HP website (

Hardware options installation 39 9. Open each of the processor locking levers in the order indicated in the following illustration, and then open th

Contents 4 Memory configurations ...

Hardware options installation 40 11. Install the processor. Verify that the processor is fully seated in the processor retaining bracket by visually

Hardware options installation 41 13. Press and hold the processor retaining bracket in place, and then close each processor locking lever. Press onl

Hardware options installation 42 15. Using a T-15 screwdriver, install the heatsink. 16. Install the storage controller (on page 18). 17. Install

Hardware options installation 43 • When returning a system board for service replacement, do not remove the TPM from the system board. When request

Hardware options installation 44 11. Install the TPM board. Press down on the connector to seat the board ("System board components" on pa

Hardware options installation 45 Retaining the recovery key/password The recovery key/password is generated during BitLocker setup, and can be saved

Cabling 46 Cabling Cabling resources Cabling configurations and requirements vary depending on the product and installed options. For more informati

Cabling 47 Installing the direct connect SATA cable Using the HP c-Class Blade SUV Cable The HP c-Class Blade SUV Cable enables the user to perfor

Cabling 48 3. Connect a USB mouse to one USB connector. 4. Connect a USB keyboard to the second USB connector. Item Description 1 Monitor 2 U

Cabling 49 o USB mouse Item Description 1 Monitor 2 USB CD/DVD-ROM drive 3 USB keyboard 4 USB hub 5 USB mouse 6 HP c-Class Blade SUV Cable

Contents 5 HP operating systems and virtualization software support for ProLiant servers ... 62 HP Technology

Troubleshooting 50 Troubleshooting Troubleshooting resources The HP ProLiant Gen9 Troubleshooting Guide, Volume I: Troubleshooting provides procedur

Software and configuration utilities 51 Software and configuration utilities Server mode The software and configuration utilities presented in this

Software and configuration utilities 52 Using HP iLO, you can do the following: • Access a high-performance and secure Integrated Remote Console to

Software and configuration utilities 53 HP Active Health System does not collect information about Active Health System users' operations, fina

Software and configuration utilities 54 HP Insight Remote Support HP strongly recommends that you register your device for remote support to enable

Software and configuration utilities 55 Intelligent Provisioning Intelligent Provisioning is a single-server deployment tool embedded in HP ProLiant

Software and configuration utilities 56 CAUTION: Perform a backup before running the Erase Utility. The utility sets the system to its original fa

Software and configuration utilities 57 For more information about HP SUM, see the product page on the HP website (http://www.hp.com/go/hpsum). To d

Software and configuration utilities 58 Flexible boot control This feature enables you to do the following: • Add Boot Options o Browse all FAT16

Software and configuration utilities 59 more information about supported operating systems, see the HP UEFI System Utilities and Shell Release Notes

Component identification 6 Component identification Front panel components Item Description 1 Hard drive bay 1 2 Server blade release button 3

Software and configuration utilities 60 Warning: The Product ID should ONLY be modified by qualified service personnel. This value should always mat

Software and configuration utilities 61 USB support HP provides standard USB 2.0 support, standard USB 3.0 support, and legacy USB support. Standard

Software and configuration utilities 62 The server blade includes new hardware that may not have driver support on all OS installation media. If you

Software and configuration utilities 63 HP Technology Service Portfolio Connect to HP for assistance on the journey to the new style of IT. HP Techn

Battery replacement 64 Battery replacement If the server blade no longer automatically displays the correct date and time, then replace the battery

Regulatory information 65 Regulatory information Safety and regulatory compliance For safety, environmental, and regulatory information, see Safety

Regulatory information 66 Valid date formats include the following: • YWW, where Y indicates the year counting from within each new decade, with 20

Electrostatic discharge 67 Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions yo

Specifications 68 Specifications Environmental specifications Specification Value Temperature range* — Operating 10°C to 35°C (50°F to 95°F) Non-

Support and other resources 69 Support and other resources Before you contact HP Be sure to have the following information available before you call

Component identification 7 Item Description Status button and system power LED* Flashing green (1 Hz/cycle per sec) = Performing power on sequence

Support and other resources 70 providers or service partners) identifies that the repair can be accomplished by the use of a CSR part, HP will ship

Support and other resources 71 Pour plus d'informations sur le programme CSR de HP, contactez votre Mainteneur Agrée local. Pour plus d'in

Support and other resources 72 HINWEIS: Einige Teile sind nicht für Customer Self Repair ausgelegt. Um den Garantieanspruch des Kunden zu erfüllen,

Support and other resources 73 sustituciones que lleve a cabo el cliente, HP se hará cargo de todos los gastos de envío y devolución de componentes

Support and other resources 74 Opcional – Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o reparo feito pel

Support and other resources 75

Support and other resources 76

Acronyms and abbreviations 77 Acronyms and abbreviations ACU Array Configuration Utility AMP Advanced Memory Protection API application program in

Acronyms and abbreviations 78 POST Power-On Self Test RBSU ROM-Based Setup Utility REST representational state transfer SAS serial attached SCSI

Documentation feedback 79 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentat

Component identification 8 Item Description 2 Drive bay 2 Hot-plug drive LED definitions Item LED Status Definition 1 Locate Solid blue

Index 80 A access panel 19 ACU (Array Configuration Utility) 60 Advanced ECC memory 34, 35 array controllers 18, 26 ASR (Automatic Server Re

Index 81 front panel components 6 front panel LEDs 6 front panel/drive cage assembly 16 G grounding methods 67 H hard drive backplane connec

Index 82 P passwords 45 phone numbers 69 population guidelines, Advanced ECC 35 power button LED 6 power fault 7 Power On/Standby button

Component identification 9 System board components Item Description 1 System battery 2 Solid state device connector 3 Processor 2 DIMM slots (