HP ProLiant BL460c Betriebsanweisung PDF herunterladen (Seite 10)

Component identification 10

Position Default Function

Off Reserved

Off Off = Power-on password is enabled.

On = Power-on password is disabled.

Off Off = No function.

On = ROM reads system configuration

as invalid.

Off Off = Set default boot mode to UEFI.

On = Set default boot mode to legacy.

— Reserved

S10

— Reserved

S11

— Reserved

S12

— Reserved

To access the redundant ROM, set S1, S5, and S6 to on.

When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all

system configuration settings from both CMOS and NVRAM.

CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to

properly configure the server or data loss could occur.

Mezzanine connector definitions

Item PCIe

Mezzanine connector 1

x16, Type A mezzanine card only

Mezzanine connector 2*

x16, Type A or B mezzanine card

*When installing a mezzanine option on mezzanine connector 2, processor 2 must be installed.

DIMM slot locations

DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP modes use the

alpha assignments for population order, and the slot numbers designate the DIMM slot ID for spare

replacement.

The arrow points to the front of the server blade.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 81 82

Keine Kommentare

HP ProLiant BL460c Betriebsanweisung Seite 10