HP DL380z Betriebsanweisung PDF herunterladen (Seite 83)

7. Install the access panel (see Installing the access panel on page 18).

8. Slide the server into the rack.

9. Connect the LAN segment cables.

10. Connect each power cord to the server.

11. Connect each power cord to the power source.

12. Power up the server (see

Powering up the server on page 16).

HP 12G SAS Expander Card

Before installing the HP 12G SAS Expander Card, observe the following requirements:

●

The following components must be installed:

◦

Storage controller

●

The SAS expander card is supported only in slot 2 of the primary PCI riser cage. It is not supported in the

secondary riser cage.

●

To ensure cables are connected correctly, observe the labels on the cable and component connectors.

●

Be sure you have the latest firmware for the controllers, HBAs, and the expander card. To download the

latest firmware, go to the HP website

http://www.hp.com/go/hpsc.

●

Understand the required cable connections:

◦

Group A—Controller to SAS expander card

Cable Description Connection to SAS

expander

Connection to Controller

776408-001 X4 mini-SAS cable Port 2 Port 2

776409-001 X4 mini-SAS cable Port 1 Port 1

781580-001 2 x4 mini-SAS to x-8 mini-

SAS Y cable

Ports 1 and 2 Port 1

HP 12G SAS Expander Card 75

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 132 133

Keine Kommentare

HP DL380z Betriebsanweisung Seite 83