HP DL380z Betriebsanweisung PDF herunterladen (Seite 124)

12 Specifications

Environmental specifications

Specification Value

Temperature range* —

Operating 10° C to 35° C (50° F to 95° F)

Non-operating -30° C to 60° C (-22° F to 140° F)

Relative humidity (noncondensing) —

Operating Minimum to be the higher (more moisture) of -12°C (10.4°F) dew point or 8%

relative humidity

Maximum to be 24°C (75.2°F) dew point or 90% relative humidity

Non-operating 5% to 95%

38.7° C (101.7° F), maximum wet bulb temperature

* All temperature ratings shown are for sea level. An altitude derating of 1.0° C per 304.8 m (1.8° F per 1,000 ft) to 3048 m (10,000 ft)

is applicable. No direct sunlight allowed. Maximum rate of change is 20°C per hour (36°F per hour). The upper limit and rate of change

might be limited by the type and number of options installed.

For certain approved hardware configurations, the supported system inlet temperature range is extended:

●

5°C to 10°C (41°F to 50°F) and 35°C to 40°C (95°F to 104°F) at sea level with an altitude derating of 1.0°C

per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft).

●

40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per

every 410 ft) above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft).

The approved hardware configurations for this system are listed on the HP website

http://www.hp.com/go/

proliant/ASHRAE.

Mechanical specifications

Specification Value

Height 8.73 cm (3.44 in)

Depth, SFF 67.94 cm (26.75 in)

Width 44.54 cm (17.54 in)

Weight (maximum—all SFF drives) 14.7 kg (32.6 lb)

*The SFF configuration includes the following components:

●

SFF drive (1)

●

Drive blanks (7)

116 Chapter 12 Specifications

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 132 133

Keine Kommentare

HP DL380z Betriebsanweisung Seite 124