HP SP400 Betriebsanweisung PDF herunterladen (Seite 59)

Advanced Use

○ Firmware: the main program running on the All-in-One

○ FPGA: the processor configuration

○ Imager: the program running on the bar code scanner module

○ Communication: the program running on the wireless communication module

6. In the File boxes, enter the names of the update files. You can use the Browse button to

navigate to the update files.

NOTE: All of the update file names must have an “.hhp” extension.

7. Press the Write to Device button to begin the update process.

8. If you are doing a firmware or FPGA update, a dialog box instructing you to restart the All-in-

One appears:

a. Click OK to dismiss the dialog box.

b. Press the green Power button on the All-in-One and hold for three seconds to turn the

device off.

c. After the All-in-One has turned off, restart it by pressing the Power button for one second.

d. When the connection status indicates that the device is connected again, restart the update

process by clicking the Write To Device button.

9. A dialog box announcing that the update has been successful or has failed appears. If the

update failed, try performing the update again before contacting support personnel.

NOTE: See the HP sp400 Series Configuration Software Users Guide for more detailed

instructions and help. It is available at www.hp.com/support/handheldsp400aio

Update firmware wirelessly

If your All-in-One is configured to communicate wirelessly, it will check with the file server for

updates every time it is turned on. If a new update is available, it will download and install the new

files automatically.

During the update process, the blue Wireless light blinks slowly and the green tail lights blink fast.

The AiO may automatically reboot more than once depending on the firmware updates needed. Be

cautious to allow for the update process to complete.

• If the update is successful, the Wireless light stops blinking and remains solid.

• If the update fails, the red Error light, the red tail lights, and the green Power light blink 20 times

quickly.

NOTE: The All-in-One may print whether the update attempt was successful or not.

For more information about updating firmware, see the HP sp400 Series Configuration Software

User Guide. It is available at www.hp.com/support/handheldsp400aio.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 65 66

Keine Kommentare

HP SP400 Betriebsanweisung Seite 59