
Set up the All-in-One
13
Install the print cartridge
1. Turn off the All-in-One by pressing and holding the green Power button for three seconds if it is
not already off.
IMPORTANT: Always turn off the All-in-One before installing a print cartridge.
2. Remove the protective tape from the print cartridge by pulling it straight out.
1
Metal contacts
2
Ink nozzles
IMPORTANT: Hold the print cartridge by its sides, as shown above. Do not touch the metal
contacts or the ink nozzles.
3. Push the side button to release the door, and swing the door open.
1
Door
Kommentare zu diesen Handbüchern