HP ENVY 7644 e-All-in-One Printer Bedienungsanleitung PDF herunterladen (Seite 6)

Set up fax

1. Connect the phone line.

Note: HP printers are designed specically for use with traditional analog phone services. If you are in a digital

phone environment (such as DSL/ADSL, PBX, ISDN, or FoIP), you might need to use digital-to-analog lters

or converters when setting up the printer for faxing. Contact your phone company to determine which setup

options are best for you.

If the phone line is only used for fax

a. Connect one end of the phone cord to the phone wall jack.

b. Connect the other end to the port labeled 1-LINE on the back of the printer.

If you have subscribed to a DSL/ADSL service, connect a DSL/ADSL lter between the 1-LINE port and the phone

wall jack.

2. Test fax setup.

The fax test checks hardware, veries phone cord type and connection status, and checks for a dial tone and an

active phone line. To run the test:

a. From the Home screen on the printer display, press the Up and Down buttons to select Fax, and then

press OK.

b. Select Settings, select Advanced Settings, select Fax Setup Wizard, and then follow on-screen instructions.

Phone wall jack

Fax port (1-LINE)

Note: Do not insert into the port labeled 2-EXT.

DSL/ADSL lter (provided by the telephone

company or service provider)

If additional devices are connected to the phone line

If you have other devices to connect, connect them as shown in the diagram below:

Phone wall jack

Parallel splitter

DSL/ADSL modem

Telephone answering machine

Telephone

ISDN wall jack

Terminal adapter or ISDN router

Broadband modem

DSL/ADSL lter

Analog telephone adaptor

* TAM: Telephone answering machine

** FoIP: Fax over Internet Protocol

English

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

Keine Kommentare

HP ENVY 7644 e-All-in-One Printer Bedienungsanleitung Seite 6