HP HP ProCurve Series 6600 Spezifikationen Seite 16

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 116
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 15
1-8
Introducing the Switch
Front of the Switch
Introducing the Switch
Tes t
(Green/Orange)
Off The normal operational state; the switch is not undergoing self-test.
On green The switch self-test and initialization are in progress after the switch has been
power cycled or reset. The switch is not operational until this LED goes off. The
Self-Test LED also comes on briefly when you “hot swap” a transceiver into the
switch; the transceiver is self-tested when it is hot swapped.
Blinking
orange
1
A component of the switch has failed its self-test. The status LED for that
component, for example an RJ-45 port, and the switch Fault LED will blink
simultaneously.
Port LEDs
(Green/Orange –
Link and Mode)
Link Indicates the port LEDs are displaying link information:
if the port LED is on, the port is enabled and receiving a link indication from the
connected device.
if the port LED is off, the port has no active network cable connected, or is not
receiving link beat or sufficient light. Otherwise, the port may have been
disabled through the switch console, the web browser interface, or ProCurve
Manager.
if the port LED is Blinking
1
(orange) simultaneously with the Fault LED, the
corresponding port has failed its self-test.
Mode The operation of the Mode LED is controlled by the LED Mode select button, and
the current setting is indicated by the LED Mode indicator LEDs near the button.
Press the button to step from one view mode to the next. The default view is
Activity (Act).
LED Mode View
(Green LEDs)
Act Indicates the port LEDs are displaying network activity information.
FDx Indicates port LEDs are lit for ports in Full Duplex Mode. Off indicates ½ duplex.
Spd Indicates the port LEDs are displaying the connection speed at which each port
is operating:
if the port LED is off, the port is operating at 10 Mbps.
if the port LED is Blinking**, the port is operating at 100 Mbps.
if the port LED is on continuously, the port is operating at 1000 Mbps.
Usr Indicates the port is displaying customer-specified information.
Switch LEDs State Meaning
Seitenansicht 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 115 116

Kommentare zu diesen Handbüchern

Keine Kommentare