HP HP ProCurve Series 6600 Spezifikationen Seite 15
- Seite / 116
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
1-7
Introducing the Switch
Front of the Switch
Introducing the Switch
LEDs
Table 1-2 describes each LED state. For more information, refer to the
Management and Configuration Guide for your switch.
Table 1-2. Switch LEDs
Switch LEDs State Meaning
Power
(Green)
On
Off
Switch power is operating correctly.
Switch power is not operating correctly or there is no power connection.
Fault
(Orange)
Off The normal state; indicates there are no fault conditions on the switch.
Blinking
1
A fault has occurred on the switch, one of the switch ports, module in the rear of
the switch, or the fan. The Status LED for the component with the Fault LED will
blink simultaneously.
On On briefly after the switch is powered on or reset, at the beginning of switch self-
test. If this LED is on for a prolonged time, the switch has encountered a fatal
hardware failure, or has failed its self-test. See chapter 4, “Troubleshooting” for
more information.
Locator (Blue) On
Blinking
Off
The Locator LED is used to locate a specific switch in a area full of switches. The
LED can be set to be on solid or blink for a specified number of minutes (1-1440).
The default is 30 minutes. Use the command “chassislocate”.
PS
(Green/Orange)
On green
Off
The switch is receiving power.
The switch is NOT receiving power.
Blinking
orange
1
A fault has occurred on one of the power supplies. The PS Status LED, Fault LED,
and on the back of the switch the failed power supply LED (PS1 or PS2) will all
blink simultaneously.
Tmp
(Green/Orange)
On green Switch temperature is normal.
Blinking
orange
1
Blinking
orange
2
An over temperature condition has been detected. This is a Fault condition
indicating elevated internal temperatures. The Fault LED will blink simultaneously.
This indicates an alert condition indicating critical internal temperatures. The
Fault LED will blink simultaneously.
Fan Status
(Green/Orange)
On
Blinking
orange
1
Blinking
orange
2
Normal operation, all fans are ok.
One of the unit’s fans has failed. The switch Fault LED will be blinking
simultaneously.
One of the unit’s fans has failed and the switch is in an overtemp condition. The
switch Fault LED will be blinking simultaneously.
Fan LED on the fan
tray (Orange)
Off
Blinking
orange
1
Normal operation, all fans are working properly.
One or more of the unit’s fans has failed. The switch Fault LED, fan status LED on
the front of the switch, and the fan status LED on the back of the switch will be
blinking simultaneously.
- HP ProCurve 6600 Switches 1
- ProCurve 6600 Switches 3
- Contents 5
- Replacing Components 6
- Troubleshooting 6
- Specifications 7
- Introducing the Switch 10
- Front of the Switch 12
- Network Ports 14
- Table 1-2. Switch LEDs 15
- Reset Button 19
- Clear Button 19
- Console Port 19
- Back of the Switch 20
- Switch Features 21
- Installing the Switch 25
- Japan Power 26
- Cord Warning 26
- Installation Precautions 27
- Installation Procedures 28
- LED Behavior During Self-Test 31
- Rack or Cabinet Mounting 35
- Power Cord 36
- HP 10000 40
- Series Notes 40
- Installing a Transceiver 49
- Removing a Transceiver 50
- 7. Connect the Network Cables 51
- 12345678 55
- Sample Network Topology 56
- ■ Improve network security 57
- ■ A remote Telnet session 58
- ■ A web browser interface 58
- Pr oCurve Switch 59
- Connections 60
- Management 61
- Sessions 61
- Pr oCurve Switch 6600-24G 63
- S tatus Inf ormation 63
- Getting Started With Switch 64
- Configuration 64
- Replacing the Fan Tray 66
- Replacing a Power Supply 67
- Basic Troubleshooting Tips 70
- Condition 72
- Proactive Networking 76
- Hardware Diagnostic Tests 77
- Testing Twisted-Pair Cabling 78
- HP Customer Support Services 80
- Acoustic 82
- ■ EN60950-1 83
- ■ CSA 22.2 No. 60950-1 83
- ■ UL 60950-1 83
- ■ IEC 60950-1 83
- Cabling specifications 85
- Cabling and Technology 87
- Information 87
- Table B-2 87
- Mode Conditioning Patch Cord 88
- Installing the Patch Cord 89
- Cable Diagram 91
- Pin Assignments 91
- 1000 Mbps Network Connections 93
- Safety Information 95
- Hinweise zur Sicherheit 97
- Safety Information (Japan) 100
- Safety Information (China) 101
- EMC Regulatory Statements 102
- European Community 103
- Safety and EMC Regulatory 104
- Statements 104
- Recycle Statements 105
- Numerics 109
- 2 – Index 110
- Index – 3 111
- 4 – Index 112
- Index – 5 113
- 6 – Index 114
- *5992-4962* 116
Verwandte Produkte und Handbücher für PC / Workstation Barebones HP HP ProCurve Series 6600
(8 Seiten)
(88 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.284 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern