HP 24S Betriebsanweisung PDF herunterladen (Seite 30)

ThinLAN Port

1. Attach a thin LAN cable section to one side of a BNC “T” connector.

2. Attach another thin LAN cable section or a 50-ohm terminator to the other side of

the “T” connector.

3. Attach the “T” connector to the ThinLAN port.

4. Fold the BNC “T” connector cover around the connection, and squeeze the surfaces

together around the edges.

Note

Each thin LAN cable segment must be terminated with a 50-ohm

terminator at each end. In the illustration above showing the ThinLAN

port at the end of a cable segment, the 50-ohm terminator is attached to

one side of the BNC “T” connector.

BNC “T”

Thin LAN

cable

Thin LAN

cable

ThinLAN port on hub

mid-cable

attachment

ThinLAN port on hub

BNC “T”

50-ohm

terminator

Thin LAN

cable

end-of-cable

attachment

BNC “T” connector cover

thin LAN cable

2-12 Installation

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 101 102

Keine Kommentare

HP 24S Betriebsanweisung Seite 30