HP B-series Embedded Switches Bedienungsanleitung PDF herunterladen (Seite 67)

Basic Switch Management

67Fabric OS Procedures Version 3.1.x/4.1.x User Guide

Example:

Viewing Routing Path Information

1. Log in as admin.

2. Enter the topologyShow command to display the fabric topology, as it

appears to the local switch.

The following entries appear:

■ Local Domain - Domain number of local switch.

■ Domain - Domain number of destination switch.

■ Metric - Cost of reaching destination domain.

■ Name - The name of the destination switch.

■ Path Count - The number of currently active paths to the destination

domain.

■ Hops - The maximum number of hops to reach destination domain.

■ Out Port - The Port that incoming frame will be forwarded to, in order to

reach the destination domain.

■ In Ports- Input ports that use the corresponding Out Port to reach the

destination domain. This is the same information provided by

portrouteshow and urouteshow.

■ Total Bandwidth - The maximum bandwidth of the out port.

■ Bandwidth Demand - The maximum bandwidth demand by the in ports.

■ Flags - Always 'D', indicating a dynamic path. A dynamic path is

discovered automatically by the FSPF path selection protocol.

switch:admin> dlsshow

DLS is not set

switch:admin> dlsset

Committing configuration...done.

switch:admin> dlsshow

DLS is set

switch:admin> dlsreset

Committing configuration...done.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 269 270

Keine Kommentare

HP B-series Embedded Switches Bedienungsanleitung Seite 67