HP B-series Embedded Switches Bedienungsanleitung PDF herunterladen (Seite 115)

Working With the Core Switch 2/64

115Fabric OS Procedures Version 3.1.x/4.1.x User Guide

Basic Blade Management

For the purposes of this section, Basic Blade Management refers to:

■ Disabling a Blade on page 115

■ Enabling a Blade on page 116

■ Powering On a Blade on page 116

■ Powering Off a Blade on page 116

■ Displaying the Status of All Slots in the Chassis on page 118

■ Displaying Information on Switch FRUs on page 119

■ Setting the Blade Beacon Mode on page 123

Disabling a Blade

The ability to disable a blade might be needed to perform diagnostics. When

diagnostics are executed manually (from the Fabric OS command line), many

commands require the blade to be in an offline state. This ensures that the activity

of the diagnostic does not interfere or disturb normal fabric traffic. If the blade is

not in an offline state (bladedisable), the diagnostic command will not

run and display an error message.

To disable a blade:

1. Log into the switch as the admin user.

2. At the command line enter the slotoff command with the following

syntax:

slotoff slotnumber

where slotnumber is the slot number of the blade you want to disable.

Example

switch:admin> slotoff 3

Slot 3 is being disabled

switch:admin>

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 269 270

Keine Kommentare

HP B-series Embedded Switches Bedienungsanleitung Seite 115