HP B-series Embedded Switches Bedienungsanleitung PDF herunterladen (Seite 208)

Troubleshooting

208 Fabric OS Procedures Version 3.1.x/4.1.x User Guide

2. Enter the cfgDisable command.

3. Enter the cfgClear command.

Caution: Be careful when using the cfgclear command because you can

inadvertently delete the Zone configuration in the fabric. Make sure you are

deleting the “incorrect” configuration.

4. Enter the switchdisable command.

5. Enter the switchenable command. This automatically evokes the

cfgSave command.

The two fabrics will be remerged.

6. See “Detailed Zone Merge Correction Procedure” on page 208 for more

detailed troubleshooting instructions.

Detailed Zone Merge Correction Procedure

For more information regarding Zoning, refer to the

HP StorageWorks Zoning

Version 3.1.x/4.1.x User Guide

For detailed troubleshooting of zone merge issues, follow the steps below.

Verify Fabric Merge Problem

1. Enter the switchshow command at the command line to validate that the

segmentation is due to a zone issue.

2. See “Zoning Setup Issues” on page 206 to view the different types of zone

discrepancies.

Edit Zone Config Members

3. Log into one of the segmented Fabrics as admin.

4. Enter the cfgshow command.

Typing the “*” symbol after the command displays list of all config names.

5. Print the output from the cfgShow command.

6. Start another Telnet session and log into the next fabric as admin.

7. Run the cfgShow command.

8. Print the output from the cfgShow command.

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 269 270

Keine Kommentare

HP B-series Embedded Switches Bedienungsanleitung Seite 208