
Figure 3-6 Printer Connection dialog box
NOTE The HP LaserJet P3005 printer does not support infrared connections.
If you select USB Cable (a "direct connection" using a USB 2.0 cable), and then click Next, the
Model dialog box opens. This is the default option.
If you select Parallel Cable (a "direct connection" using a parallel cable), and then click Next, the
Model dialog box opens.
NOTE The printing-system software should be installed before the HP LaserJet P3005 printer
is connected to the computer through a parallel or USB connection and turned on. During the
installation process, the software will prompt you to connect the device.
To continue with the default installation sequence, see Figure 3-19 Model dialog box on page 76.
If you are installing the HP LaserJet P3005 printer over the network, select Wired Networking in the
Printer Connection dialog box.
For a network installation, the HP LaserJet P3005 printer must be connected to the network and turned
on before the printing-system software is installed so that the software can detect the device.
NOTE For wireless installation instructions using an HP Jetdirect ew2400 802.11g Wireless
Print Server or an HP Direct 380x802.11B wireless print server, consult the documentation that
comes with the print server.
Click Next to continue.
ENWW Print-driver installation instructions 63
MS Windows install
Kommentare zu diesen Handbüchern