HP P3005dn Betriebsanweisung PDF herunterladen (Seite 245)

The default setting is Unspecified, and the program selects the media type. Before selecting a different

setting, make sure that the correct media type is loaded in the tray that's specified in the Source is:

setting.

If the print-driver setting is changed to a media type that is not currently loaded in the device, a control-

panel message appears that prompts you to load the media type or select another tray.

Use Different Paper/Covers

Print books that include different media types by using the Use Different Paper/Covers options.

When the Use Different Paper/Covers check box is selected the following settings can appear in the

group box, along with the associated options:

●

Front Cover

●

First Page

●

Other Pages

●

Last Page

●

Back Cover

NOTE When you change the Source Is and Type is settings for any of the covers or pages,

the settings remain configured until you close the software program from which you are printing.

For example, if you select First Page and change the media source or type, and then select

Back Cover to change the media source or type, the check mark remains beside Front Cover

and the selected source and type settings remain in effect. The settings are cleared only when

you close the software program.

Front Cover

Use the Front Cover options to include a blank or preprinted front cover on a document, or to include

a front cover from a source tray that is different from the one used for the remainder of the document.

The following figure shows the Front Cover setting and options.

ENWW Paper/Quality tab features 221

HP unidrivers for

Windows

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 405 406

Keine Kommentare

HP P3005dn Betriebsanweisung Seite 245