
NOTE The job-storage feature requires at least 80 MB of total memory or that an optional hard
disk is installed.
If the job-storage feature is enabled (with at least 80 MB of total memory), three Job Storage Mode
settings are available on the Job Storage tab:
●
Off
●
Proof and Hold
●
Private Job
Two additional Job Storage Mode settings become available on the Job Storage tab if a hard disk is
installed:
●
Quick Copy
●
Stored Job
To use job-storage features when printing, follow these steps:
1. Click File and then click Print from the software program. The Print dialog box appears.
NOTE Clicking the print icon in the software program toolbar prints the job without using
job-storage features.
2. Click Properties. The Properties dialog box appears.
3. Click the Device Options tab.
4. In the Printer features setting, select the job-storage options by clicking the appropriate option
button, and then complete any required fields.
5. Click OK.
After you send a print job that uses the job-storage feature, you can release the job to print from the
device control panel.
1. Press theMenu button to open the menus.
2. Press
(the up arrow) or (the down arrow) until RETRIEVE JOB is highlighted on the device
control panel, and then press
(select).
3. Press
(up) or (down) to scroll to your user name, and then press (select).
4. Press
(up) or (down) to scroll to the job name, and then press (select).
5. Press
(up) or (down) until PRINT is highlighted on the device control panel, and then press
(select).
6. Press
(select).
7. If a PIN number is assigned to the job, press
(up) or (down) to select the first digit of the PIN,
and then press
(select). The number in the device control-panel display changes to an asterisk.
Repeat this step for each of the remaining three digits of the PIN number.
If no PIN number is assigned to the job, continue with the next step.
ENWW HP Traditional PostScript Level 3 Emulation Driver features 189
HP traditional print
drivers for MS Windows
Kommentare zu diesen Handbüchern