Hp ProLiant DL145 G3 Server Bedienungsanleitung Seite 28
- Seite / 63
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Using LO100 28
Controlling server power remotely
LO100 enables you to remotely operate the power button of a host server using a web browser or the
CLP. LO100 virtual power support enables you to power on, power off, and power cycle the host server.
This virtual power support operates independently of the state of the operating system.
Controlling server power from a browser
The Virtual Power screen displays current power status, how long the server has been powered on, and
the reason for the last server restart. To display the Virtual Power screen, on the main menu navigation
bar, click Virtual Power.
To modify Chassis Actions, select a Power Control Option in the Chassis Actions section, and then click
Apply.
To identify the server in the rack and illuminate the UID (the LED on the front panel of the server), from the
UID list, select the length of time for the UID to illuminate, and then click Identify.
NOTE: The UID is not available on all LO100 servers. For more information, see your server
user guide.
A restore policy controls how the system responds when power is connected to the server. To set a restore
policy:
1. Select the Power Restore Policy by choosing one of the following options:
o Always power up—Powers on the server immediately after power is supplied.
o Restore to powered state prior to power loss—Powers on the system if the system was in the
powered on state before a loss of power.
o Power pushbutton or command required to power on system—Causes the server to wait for
external action before powering on the system.
2. Click Set.
- User Guide 1
- Intended audience 2
- Contents 3
- Contents 4 4
- Operational overview 5
- LO100 standard features 6
- LO100 optional features 6
- Virtual KVM 7
- Management Card 8
- Post-installation procedures 9
- Configuration 10
- Using the serial port 11
- — BMC HTTP Server: [Enabled] 12
- Updating the firmware 16
- Using LO100 18
- Using CLP 19
- CLP syntax 20
- Base commands 21
- Using LO100 22 22
- Using LO100 24 24
- IPMI 2.0 support 25
- Logging in to LO100 26
- Browser main menu options 27
- Monitoring sensors 29
- Using the system event log 32
- Using Virtual KVM 34
- Using LO100 35 35
- 1. Log in to LO100 35
- Using LO100 36 36
- Mouse synchronization 37
- System buttons 38
- Using Virtual Media 39
- Using LO100 40 40
- Shared virtual media devices 41
- Redirecting a Linux console 43
- Hardware Inventory page 46
- User administration 46
- 47
- Network settings 48
- Installing a license key 51
- Importing a certificate 51
- Creating a certificate 52
- Log out 56
- Technical support 57
- HP SIM support 57
- Acronyms and abbreviations 58
- Index 61 61
- Index 62 62
- Index 63 63
Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant DL145 G3 Server
(61 Seiten)
(51 Seiten)
(73 Seiten)Whirlpool R 24 S (EU) podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Lodówki Whirlpool R 24 S (EU).
Dostarczamy 1 pdf podręczników Whirlpool R 24 S (EU) do pobrania za darmo według typów dokumentów: Instrukcja Obsługi
Kommentare zu diesen Handbüchern