Hp NonStop G-Series Bedienungsanleitung PDF herunterladen (Seite 23)

Chapter Five - SCSI Bridge Electronics

When the desired tape density appears, push the mode switch to select it. The selected setting is used until

the unit is power cycled or reset. These choices are offered:

C0 = Compressed format

40 = Uncompressed format

FF = Density controlled by the host software

Note

: The setting from the last change of tape density is used as the default start-up value. The density

can be changed on a tape-by-tape basis any time the tape is at BOT during normal Performance

display operation.

5.9 Setup Display Format

Configuration of the electronics is accomplished by using the mode switch. All values are retained in

nonvolatile memory. There are three setup menus: Setup 1 and Setup 2 contain configuration items and

Setup 3 contains diagnostic and special utilities. Enter the setup menus by holding in the mode switch while

powering up the unit. The menu display system consists of the following hierarchy:

Mode

Switch

*Set-Up*

Release

Button

to Start

Enter

Set-Up 1

PRESS to

Select

Enter

Set-Up 2

PRESS to

Select

Enter

Set-Up 3

PRESS to

Select

Exit

Set-Up

PRESS to

Select

Figure 24 LCD setup menus

5.10 Setup Overview

Within each menu, the individual items generally take this format on the four-line LCD:

LCD Setup Format

SCSI ID:

[00]

PRESS to

Alter

Parameter

Setting

Instruction

Figure 25 LCD setup format

•PARAMETER denotes the configuration being reviewed or edited.

•SETTING (in SETUP 1 and SETUP 2) is the value that you can change.

•INSTRUCTION describes what action should be taken if the mode switch is pressed. If the mode switch

is inactive for four seconds, the display changes. In general, the menu system is designed to display the

current setting continuously. The instruction PRESS to Alter allows the operator to alter the value.

HP StorageWorks DAT 72 (Model 5242-2SE) User's Guide 19 HP Part Number 528297-003 July 2005

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 42 43

Kommentare zu diesen Handbüchern

Keine Kommentare

Hp NonStop G-Series Bedienungsanleitung Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Hp NonStop G-Series