HP EliteDesk 705 G3 Small Form Factor PC Bedienungsanleitung PDF herunterladen (Seite 30)

Removing a 9.5 mm slim optical drive

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB ash drives, from the computer.

3. Turn o the computer properly through the operating system, and turn o any external devices.

4. Disconnect the power cord from the AC outlet and disconnect any external devices.

IMPORTANT: Regardless of the power-on state, voltage is always present on the system board as long

as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage

to the internal components of the computer.

5. If the computer is on a stand, remove the computer from the stand.

6. Remove the computer access panel.

7. Disconnect the power cable (1) and data cable (2) from the rear of the optical drive, push the green

release latch on the right rear side of the drive toward the center of the drive (3), and then slide the drive

forward and out of the bay through the front bezel (4).

IMPORTANT: When removing the cables, pull the tab or connector instead of the cable itself to avoid

damaging the cable.

24 Chapter 2 Hardware upgrades

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

Keine Kommentare

HP EliteDesk 705 G3 Small Form Factor PC Bedienungsanleitung Seite 30