HP EliteDesk 705 G3 Small Form Factor PC Bedienungsanleitung PDF herunterladen (Seite 19)

Changing from desktop to tower conguration

The Small Form Factor computer can be used in a tower orientation with an optional tower stand that can be

purchased from HP.

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB ash drives, from the computer.

3. Turn o the computer properly through the operating system, and turn o any external devices.

4. Disconnect the power cord from the AC outlet and disconnect any external devices.

IMPORTANT: Regardless of the power-on state, voltage is always present on the system board as long

as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage

to the internal components of the computer.

5. Orient the computer so that its right side is facing down and place the computer in the optional stand.

NOTE: To stabilize the computer in a tower orientation, HP recommends the use of the optional tower

stand.

6. Reconnect the power cord and any external devices, and then turn on the computer.

NOTE: Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer remains clear

and free of obstructions.

7. Lock any security devices that were disengaged when the access panel was removed.

Changing from desktop to tower conguration 13

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Keine Kommentare

HP EliteDesk 705 G3 Small Form Factor PC Bedienungsanleitung Seite 19