HP Visualize b2000 - Workstation Spezifikationen PDF herunterladen (Seite 54)

54 Chapter2

Using Your CD Drive

Verifying the CD Drive Operation

To verify that your workstation can communicate with the CD drive,

follow the steps covered in this section. Note that to perform the steps

required in this section, you must be superuser (root). If you cannot log

in as root contact your system administrator.

1. Log in as root.

2. Type the following command at the shell prompt and press Enter:

/usr/sbin/ioscan -d sdisk

After a few seconds the ioscan utility lists all of the I/O devices that

use the “sdisk” driver. Your CD drive should be among the devices

listed. The list appears similar to the following:

H/W Path Class Description

===============================================

10/0/15/1.5.0 disk SEAGATE ST39102LC

10/0/15/1.6.0 disk SEAGATE ST39102LC

10/0/14/0.0.0 disk TEAC CD-532E-B

If ioscan does not detect any usable I/O system devices, such as the

CD drive, nothing is output and you are returned to the system

prompt. Since this indicates possibly that the driver for the CD drive

is not conﬁgured, read the section “Conﬁguring the CD Driver” in this

chapter.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 228 229

Keine Kommentare

HP Visualize b2000 - Workstation Spezifikationen Seite 54