14-38
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 14 Administering the CAM
Policy Import/Export
Figure 14-24 Successful Manual Sync
Step 8 Click OK to return to the main screen.
Perform Auto Sync
Note Cisco strongly recommends performing a Manual Sync and verifying that it is working successfully
before enabling Auto Sync between your Clean Access Managers.
Step 1 On the Master CAM, make sure only the policies you want to enable for auto sync are selected on the
Configure Master page (Figure 14-15). Make sure to click the Update button if changing the settings.
Step 2 On the Master CAM, go to Administration > CCA Manager > Policy Sync > Auto Sync
(Figure 14-25)
Figure 14-25 Auto Sync
Step 3
The list of configured Receivers appears under the Receiver Host Name /IP column on the page.
Step 4 Click the checkbox for Automatically sync starting from[]. In the adjoining text box, type the initial
time to start and repeat the auto policy sync in hh:mm:ss format (e.g. 22:00:00)
Step 5 In the every [] day(s) text box, type the number of days after which to repeat the auto synchronization.
The minimal interval is 1 for 1 day.
Step 6 Click the Auto Sync checkbox for each Receiver CAM to which you want to export polices.
Kommentare zu diesen Handbüchern