HP 3350 - Cisco NAC Appliance Spezifikationen PDF herunterladen (Seite 121)

100

101

3-31

Cisco NAC Appliance - Clean Access Manager Configuration Guide

OL-28003-01

Chapter 3 Switch Management: Configuring Out-of-Band Deployment

Configure OOB Switch Management on the CAM

The Switch profiles list under OOB Management > Profiles > Device > List provides three icons:

• Devices—Clicking this icon brings up the list of added switches and WLCs under OOB

Management > Devices > Devices > List (see Figure 3-28).

• Edit—Clicking this icon brings up the Edit Switch profile form (see Figure 3-16).

• Delete—Clicking this icon deletes the Switch profile (a confirmation dialog will appear first).

Add Switch Profile

Use the following steps to add a Switch profile.

Step 1 Go to OOB Management > Profiles > Device > New (Figure 3-15).

Figure 3-15 New Switch Profile

Step 2 Enter a single word for the Profile Name. You can use digits and underscores but no spaces.

Note It is recommended to enter a Switch Profile name that identifies the switch model, and SNMP read and

write versions. For example “2950v2v3.”

Step 3 Enter the SNMP Port configured on the switch to receive read/write requests. The default port is 161

for SNMP GET/SET and the default port is 162 for Traps.

Step 4 Enter an optional Description.

Note You can click the link available at the top of this tab to view the list of supported device models.

Step 5 Configure SNMP Read Settings to match those on the switch.

• Choose the SNMP Version: SNMP V1, SNMP V2C, or SNMP V3.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 680 681

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 3350 - Cisco NAC Appliance Spezifikationen Seite 121

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für PC / Workstation Barebones HP 3350 - Cisco NAC Appliance