HP 3350 - Cisco NAC Appliance Spezifikationen PDF herunterladen (Seite 175)

100

101

4-11

Cisco NAC Appliance - Clean Access Manager Configuration Guide

OL-28003-01

Chapter 4 Wireless LAN Controller Management: Configuring Wireless Out-of-Band Deployment

Configure Your Wireless LAN Controllers

Step 1 Click Management and then Communities under SNMP. The SNMP v1 / v2c Community page

appears.

Step 2 Click New to create a new community. The SNMP v1 / v2c Community > New page appears

(Figure 4-5).

Figure 4-5 SNMP v1 / v2c Community > New Page

Step 3 In the Community Name field, enter a unique name containing up to 16 alphanumeric characters. (Do

not enter “public” or “private.”)

Step 4 Enter the IP Address of the CAM from which this device accepts SNMP packets with the associated

community and the respective IP Mask.

Step 5 Choose Read/Write from the Access Mode dropdown menu to specify the access level for this

community.

Step 6 Choose Enable from the Status dropdown menu to activate this community.

Step 7 Click Apply to commit your changes.

Step 8 Click Save Configuration to save your settings.

Step 9 Repeat this procedure if a “public” or “private” community still appears on the SNMP v1 / v2c

Community page.

For more information, refer to the Cisco Wireless LAN Controller Configuration Guide, Release 5.1.

Specify the CAM as the SNMP Trap Receiver

Once you enable and configure SNMP on the Wireless LAN Controller, you must also ensure the WLC

knows which CAM is receiving SNMP trap messages.

To specify the host name and IP address of the SNMP trap receiver CAM:

Step 1 Click Management and then Trap Receivers under SNMP. The SNMP Trap Receivers > New page

appears (Figure 4-6).

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 680 681

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 3350 - Cisco NAC Appliance Spezifikationen Seite 175

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für PC / Workstation Barebones HP 3350 - Cisco NAC Appliance