Hp RP7 Retail System Model 7100 Bedienungsanleitung PDF herunterladen (Seite 28)

Reading Parameters

Move the scanner toward the target and center the aiming pattern and illumination system to capture

and decode the image. See

Using the Scanner on page 17 for more information.

The aiming system will briefly switch off after the acquisition time, and if no code is decoded will

switch on again before the next acquisition. The illuminator will remain on until the symbol is decoded.

As you read code symbols, adjust the distance at which you are holding the scanner.

Aiming System

A number of options for customizing control of the Aiming System are available. See the HP Wireless

Barcode Scanner Programming Reference Guide (PRG) for more information and programming bar

codes.

Good Read Green Spot Duration

Successful reading can be signaled by a good read green spot.

Use the bar codes that follow to specify the duration of the good read pointer beam after a good read.

Figure 5-2 ENTER/EXIT PROGRAMMING MODE

Figure 5-3 Disabled

Figure 5-4 Short (300 ms)

Figure 5-5 Medium (500 ms)

Figure 5-6 Long (800 ms)

22 Chapter 5 Programming the Scanner

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 40 41

Keine Kommentare

Hp RP7 Retail System Model 7100 Bedienungsanleitung Seite 28