Hp RP7 Retail System Model 7100 Bedienungsanleitung PDF herunterladen (Seite 23)

3. Carefully lift out the gold contacts circuit (1), and remove the battery holder cap while letting the

white connector pass through the hole (2) in the battery holder (as shown below).

Figure 4-10 Removing the Battery Holder Cap

4. Remove the old battery from its place (if present), and insert the new battery in the same

position.

5. Replace the battery holder cap, plug in the connector and return the contacts circuit to its

previous location.

NOTE: When inserting the new battery into the handle, take care to position the battery and

the connector as described above.

6. Insert the cover in the handle and screw it back into place.

Using the Scanner

The scanner normally functions by capturing and decoding codes. It is equipped with an internal

motion-sensing function that activates the aiming system on device motion. The intelligent aiming

system indicates the field of view that should be positioned over the bar code:

Figure 4-11 Aiming System

Using the Scanner 17

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 40 41

Keine Kommentare

Hp RP7 Retail System Model 7100 Bedienungsanleitung Seite 23