Hp StorageWorks 2.32 Edge Switch Bedienungsanleitung PDF herunterladen (Seite 151)

Optional Features

151HA-Fabric Manager User Guide

Configuration Procedure

To configure the FICON management server, use the following steps:

1. Choose Configure > Management Server from the Element Manager

window. The Configure FICON Management Server dialog box displays, as

shown in Figure 80.

Figure 80: Configure FICON Management Server dialog box

2. Enable or disable the management server by clicking Enable Management

Server check box. (To disable the management server, click the check box

again to remove the check mark.)

3. Enable or disable switch clock alert mode by clicking the Director Clock

Alert Mode check box. When a check mark displays, the alert mode is

enabled.

4. Allow or prohibit host control by clicking the check box in the Host Control

Prohibited field. When a check mark displays, host control is prohibited.

5. Allow or prohibit offline state control by clicking the check box in the

Programmed offline state control field. When a check mark displays,

programmed control of the offline state is allowed.

6. Enable or disable Active=Saved mode by clicking the check box in the

Active=Saved field. When a check mark displays, the Active=Saved mode is

enabled.

7. If necessary, choose a code page from the Code Page drop-down list.

8. Activate changes and close the dialog box by clicking the Activate button.

United Kingdom 00285 011D

France 00297 0129

International #5 00500 01F4

Table 8: Port Name Language Code Pages (Continued)

Code Page Name Code Page Hexadecimal CPGID

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 299 300

Keine Kommentare

Hp StorageWorks 2.32 Edge Switch Bedienungsanleitung Seite 151