Hp StorageWorks 2.32 Edge Switch Bedienungsanleitung PDF herunterladen (Seite 138)

Optional Features

138 HA-Fabric Manager User Guide

13. Choose an action from the Actions list at the bottom left of the dialog box.

For help with adding specific actions, see “Event Management Component

Overview” on page 128.

14. Enter the required information in the Value column for each listed parameter.

15. Click Add. The action you configured displays in the Actions area in the top

half of the dialog box.

16. Repeat step 14 through step 15 to add more actions.

17. Use the buttons to the right of the Actions area to move the action phrases up

or down.

— Click Delete to remove selected rows from the table.

— Click the up and down arrows to move selected actions up and down to

change the order in which the actions are started.

18. Click OK.

Specifying a Rule’s Actions

After specifying a rule’s triggers, you can add actions that the application

performs when trigger conditions are met.

Specifying an E-mail Action

You can configure the application to send an e-mail message when the specified

trigger is fired.

Note: Before specifying an action, you should specify the rule’s triggers. See “About

Triggers” on page 128 for instructions.

1. Click the Event Management tab on the main window. The Event

Management tab displays, as shown in Figure 69 on page 133.

2. Click New. The Add Rule dialog box displays, as shown in Figure 70 on

page 134.

3. Choose E-mail from the Actions list at the bottom left side of the dialog box.

The E-mail information displays, as shown in Figure 73.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 299 300

Keine Kommentare

Hp StorageWorks 2.32 Edge Switch Bedienungsanleitung Seite 138