Hp MPX200 Multifunction Router Bedienungsanleitung PDF herunterladen (Seite 53)

Example

c:\> rcli set iscsi -port=1 -ipv4_static -ipv4_addr=10.0.0.5

/ip=10.0.0.12

iSCSI Port 1 basic info successfully configured

set iscsi_adv

The set iscsi_adv command sets an advanced iSCSI port configuration.

Syntax

set iscsi_adv

Keywords

Specifies the port number for the iSCSI port that you want to configure.-port=

Specifies a bandwidth limit for the iSCSI port. Values are:-bandwidth=

• A positive number ≤125 for 1 Gb iSCSI port

• A positive number ≤1250 for 10 Gb iSCSI port

The default value is set on the router. Set to 0 to remove a previously applied limit.

This keyword is supported with router firmware Version 3.3.0.0 or later.

Enables CHAP for the iSCSI port. Values are:-chap_enable

• yes

• no

• on

• off

• true

• false

If CHAP is enabled, the -chap_secret keyword defaults to an empty string unless

it is included on the command line.

Specifies the CHAP secret for the iSCSI port.-chap_secret

Enables the data digest for the iSCSI port. Values are:-data_digest_enable

• yes

• no

• on

• off

• true

• false

The default value is set on the router.

Enables the header digest for the iSCSI port. Values are:-header_digest_enable

• yes

• no

• on

• off

• true

• false

The default value is set on the router.

set iscsi_adv 53

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 119 120

Keine Kommentare

Hp MPX200 Multifunction Router Bedienungsanleitung Seite 53