Hp MPX200 Multifunction Router Bedienungsanleitung PDF herunterladen (Seite 24)

disable iscsi_port

The disable iscsi_port command disables the specified iSCSI port.

Syntax

disable iscsi_port

Keyword

Specifies the port number of the iSCSI port to disable.-port

Example

c:\>rcli disable iscsi_port -port=1 /ip=10.0.0.12

iSCSI Port 1 successfully disabled

discover iscsi_target

The discover iscsi_target command discovers iSCSI targets at a specified IP address.

NOTE: This command is supported with router firmware Version 3.2.3.0 or later.

Syntax

discover iscsi_target

Keywords

Specifies that CHAP is enabled for this initiator. Values are:-chap_enable=

• yes

• no

• on

• off

• true

• false

If this keyword is not used, CHAP is disabled.

Specifies a CHAP password.-chap_secret=

This keyword is ignored if CHAP is not enabled.

Specifies the iSCSI target IPv4 or IPv6 address.-iscsi_ipaddr

Specifies the outbound iSCSI port number.-port

Specifies the TCP port to use on the iSCSI target. The value must be in the range of

1024 to 65534.

-tcp_port=

If this keyword is not used, the default port is 3260.

Example

c:\> rcli discover iscsi_target -port=1 -iscsi_ipaddr=10.0.0.5

/ip=10.0.0.12

iSCSI Target discovery successful

enable beacon

The enable beacon command enables flashing the router LEDs.

24 Command reference

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 119 120

Keine Kommentare

Hp MPX200 Multifunction Router Bedienungsanleitung Seite 24