HP Switch 6120 Bedienungsanleitung PDF herunterladen (Seite 160)

100

101

4-23

TACACS+ Authentication

Configuring TACACS+ on the Switch

To delete a per-server encryption key in the switch, re-enter the tacacs-server

host command without the key parameter. For example, if you have

north01

configured as the encryption key for a TACACS+ server with an IP address of

10.28.227.104 and you want to eliminate the key, you would use this command:

ProCurve(config)# tacacs-server host 10.28.227.104

Note You can save the encryption key in a configuration file by entering this

command:

Procurve(config)# tacacs-server key <keystring>

The <keystring> parameter is the encryption key in clear text.

Note The show tacacs command lists the global encryption key, if configured.

However, to view any configured per-server encryption keys, you must use

show config or show config running (if you have made TACACS+ configuration

changes without executing

write mem).

Configuring the Timeout Period. The timeout period specifies how long

the switch waits for a response to an authentication request from a TACACS+

server before either sending a new request to the next server in the switch’s

Server IP Address list or using the local authentication option. For example,

to change the timeout period from 5 seconds (the default) to 3 seconds:

ProCurve(config)# tacacs-server timeout 3

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 468 469

Kommentare zu diesen Handbüchern

Keine Kommentare

HP Switch 6120 Bedienungsanleitung Seite 160

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP Switch 6120