HP PROCURVE 6600 Bedienungsanleitung PDF herunterladen (Seite 303)

100

101

Power Over Ethernet (PoE/PoE+) Operation

Configuring PoE Operation

Manually Configuring PoE Power Levels

You can specify a power level (in watts) allocated for a port by using the value

option. This is the maximum amount of power that will be delivered.

To configure a port by value, first set the PoE allocation by entering the poe-

allocate-by value command:

ProCurve(config)# int A6 poe-allocate-by value

or in interface context:

ProCurve(eth-A6)# poe-allocate-by value

Then select a value:

ProCurve(config)# int A6 poe-value 15

or in interface context:

ProCurve(eth-A6)# poe-value 15

To view the settings, enter the show power-over-ethernet command:

ProCurve(config)# show power-over-ethernet A6

Status and Counters - Port Power Status for port A6

Power Enable : Yes

LLDP Detect : enabled

Priority : low Configured Type :

AllocateBy : value Value : 15 W

Detection Status : Delivering Power Class : 2

Maximum

power

delivered

Over Current Cnt : 0 MPS Absent Cnt : 0

Power Denied Cnt : 0 Short Cnt : 0

Voltage : 55.1 V Current : 154 mA

Power : 8.4 W

Figure 11-1. Example Displaying PoE Allocation by Value and the Maximum Power Delivered

If you set the PoE maximum value to less than the PD requires, a fault occurs.

11-13

1 2 ... 298 299 300 301 302 303 304 305 306 307 308 ... 853 854

Kommentare zu diesen Handbüchern

Keine Kommentare

HP PROCURVE 6600 Bedienungsanleitung Seite 303

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP PROCURVE 6600